MikroTik RBmAP-2nD AR9331 CPU, 64MB RAM, 2xLAN, built-in 2.4Ghz 802.11bgn wireless


Product Code: RBmAP-2nD

Barcode: 4752224004291

87.45 incl. GST 87.45 AUD 87.45


    This combination does not exist.

    Add to Cart Buy Now


    MikroTik provides hardware and software for Internet connectivity. Our experience in using industry standard PC hardware and complete routing systems allowed us in 1997 to create the RouterOS software system that provides extensive stability, controls, and flexibility for all kinds of data interfaces and routing.

    Share this product:

    MikroTik RBmAP-2nD AR9331 CPU, 64MB RAM, 2xLAN, built-in 2.4Ghz 802.11bgn wireless

    MikroTik mAP is a Dual-Chain 2.4GHz micro AP, 650MHz CPU, 64MB RAM, 2xEthernet, PoE out.

    The MikrotTik mAP (micro Access Point) is a tiny size wireless Dual-Chain 2.4GHz Access Point with full RouterOS capabilities.

    It is very portable, since it accepts power from a wide variety of sources - USB, Passive PoE and power jack.

    It also works as a PoE injector - the second Ethernet port provides up to 500mA of power to another device, for example, you can connect a SXT CPE device to it.

    Product code: RBmAP2nD
    Architecture: MIPSBE
    CPU: QCA9531
    CPU core count: 1
    CPU nominal frequency: 650 MHz
    Dimensions: 68x68x19mm
    RouterOS licence: 4
    Operating System: RouterOS
    Size of RAM: 64 MB
    Storage size: 16 MB
    Storage type: FLASH
    MTBF: Approximately 100'000 hours at 25C
    Tested ambient temperature: -20°C to 70°C

    Wireless capabilities:
    Wireless 2.4 GHz Max data rate: 300 Mbit/s
    Wireless 2.4 GHz number of chains: 2
    Wireless 2.4 GHz standards: 802.11b/g/n
    Antenna gain dBi for 2.4 GHz: 1.2
    Wireless 2.4 GHz chip model: QCA9531
    Wireless 2.4 GHz generation: Wi-Fi 4

    10/100 Ethernet ports:2

    Number of USB ports: 1
    USB Power Reset: Yes
    USB slot type: microUSB type AB
    Max USB current (A): 1

    MicroUSB input Voltage: 5-5 V
    Number of DC inputs: 3 (DC jack, PoE-IN, MicroUSB)
    DC jack input Voltage: 8-57 V
    Max power consumption: 5 W
    Cooling type: Passive
    PoE in: 802.3af/at
    PoE in input Voltage: 12-57 V

    PoE-out ports: Ether2
    PoE out: Passive PoE
    Max out per port output (input 18-30 V): 0.5 A
    Max total out (A): 0.5 A

    Certification & Approvals:
    Certification: FCC, IC

    PCB temperature monitor: Yes
    Voltage Monitor: Yes

    Wireless specifications:
    2.4 GHz         Transmit (dBm)   Receive Sensitivity
    1MBit/s            22                     -96
    11MBit/s    22                     -89
    6MBit/s            20                            -93
    54MBit/s    18                     -74
    MCS0            20                     -93
    MCS7            16                     -71

    Recently viewed Products